Skip to main content

Equipment and hardware: find the right explanation

Practical projects · Beginner-friendly

Radio hardware is easy to buy and surprisingly hard to evaluate without understanding what every component contributes to the link. This page is a hardware reference hub, not another technology competing with Meshtastic or MeshCore.

For an introduction to the parts of a station, start with Lesson 4: Equipment Explained.

What are you trying to build?​

GoalBest place to beginWhy
Two portable Meshtastic devicesMeshtastic: Getting StartedCompatible radio settings, supported boards, battery and first contact
A MeshCore companion or repeaterMeshCore: Roles and RepeatersFirmware roles and RF coverage considerations
A better home antennaAntennas: Build a Better LinkFrequency, polarization, gain, patterns, mounting and testing
A tower feedline runFeedline, SWR and LossCompare cable attenuation and why connections matter
See watts lost in coaxInteractive Antenna LabModel frequency, coax type, power, and length
Build a sensor/weather nodeMeshtastic TelemetrySensor compatibility, wiring concepts, interval choices and local LoRa reporting
Share GPS coordinatesMeshtastic GPS and PrivacyChoose sources, precision, fixed stations and safe sharing
Connect an Internet gatewayMeshtastic MQTT and ResilienceCompare broker-based and radio-only behavior

What each piece of the station does​

  • Radio and firmware: Generate, receive and interpret compatible RF packets. The correct frequency hardware and supported firmware matter more than generic marketing labels.
  • Antenna: Moves RF energy between circuitry and space, with a particular frequency response, polarization and radiation pattern.
  • Feedline and connectors: Carry signals to/from an external antenna, while introducing attenuation and potential weather or installation problems.
  • Power supply: Determines whether the system remains available during a utility failure or when running unattended.
  • Sensors and positioning: Provide useful measurements or location data if supported by the hardware and firmware.
  • Network gateway: Optionally shares selected information through MQTT and Internet/IP services. This is not required for local LoRa messaging.

A simple pre-purchase checklist​

  1. Check the exact board and RF band. Some device families sell similar hardware built for different frequencies.
  2. Confirm current firmware support and whether the required GPS or sensor peripheral is supported.
  3. Verify the antenna's specifications for your operating band and intended pattern; connector fit is not proof of compatibility.
  4. Estimate the complete coax length, including routing and adapters. Compare actual manufacturer loss data in the Antenna Lab.
  5. Plan the power budget. Continuous operation, battery run-time and solar charging often matter more than maximum transmitter power.
  6. Know whether the project's critical functions depend on the Internet, a broker or a local radio path.
  7. Protect privacy before advertising station location, publishing channel keys or uploading unencrypted telemetry.
  8. Install safely. Antennas, roof work, towers, power lines, lightning, structural loads and RF exposure require appropriate equipment and qualified help when needed.

Don't assume the most expensive device or highest advertised antenna gain is automatically the right choice. A small radio with a better location and suitable cable may outperform much more powerful gear installed poorly.

When the setup doesn't work​

Before replacing hardware, run a repeatable test and change one variable at a time. Our antenna troubleshooting guide covers hardware and RF path issues. Our Meshtastic troubleshooting guide helps separate hardware problems from firmware, MQTT, GPS and telemetry problems.

Something still confusing? Ask the community forum, including the equipment model and what you have observed. You don't need to post a home address or private account information to get help.