APRS: more than dots on a map
What problem does it solve? APRS (Automatic Packet Reporting System) is widely used by amateur radio operators to exchange short, timely reports such as positions, status, messages and weather information.
If you've only seen APRS on a website showing station locations, there's an important fact to know: APRS can work locally by radio without the Internet. A web map is one possible display for information that originated on radio.
Start with a simple example
A weather station collects a temperature reading. Its equipment formats a short packet and transmits it over a suitable radio link. A nearby receiving station can decode it directly. A digipeater may relay the packet so other stations can hear it. An IGate may pass some received information into the Internet-based APRS-IS network.
None of those extra steps is guaranteed or required for the local direct-radio exchange.
Four terms worth understanding
| Term | Plain-English meaning |
|---|---|
| Packet | A short formatted message containing information |
| AX.25 | A common packet-radio framing method used to organize data transmitted by radio |
| Digipeater | A station that receives and retransmits selected digital packets |
| IGate | An Internet gateway linking radio-side APRS traffic with APRS-IS services |
A TNC (Terminal Node Controller) is equipment or software that handles packet-radio functions between a computer and a radio. Some stations use a separate TNC, while others use software modem arrangements or integrated hardware.
How is this different from a mesh network?
Conventional APRS often sends packets as broadcasts so any compatible station in range can receive them. Digipeaters may retransmit selected packets, but that's not the same as a general mesh system finding routes for arbitrary traffic.
APRS is also not limited to tracking cars. Status, telemetry, weather and short messages are significant parts of the ecosystem.
What about an APRS weather station?
To build one, you might need a sensor, controller/computer, packet modem or interface, radio, suitable antenna and power source. The exact combination depends on the software and hardware selected.
Before buying parts, decide:
- What data do you want to share, and how often does it genuinely change?
- Who needs to receive it—and is there a useful direct radio path or digipeater?
- Do you need an Internet map, or is local radio reception enough?
- Does the station identify and operate legally under the applicable amateur rules?
- Are reports frequent enough to be useful without needlessly congesting the channel?
What commonly goes wrong?
- No packet decoded: frequency, modulation, audio levels, signal path or packet framing may be incorrect.
- Visible locally but not online: you may have a functioning RF path but no IGate receiving and forwarding the packet.
- Packets collide: too-frequent transmission uses scarce airtime and can reduce everyone else's success.
- Website shows no recent reports: absence from a web map isn't proof that nothing happened over the air.
Primary sources
In the United States, most terrestrial APRS operation is part of the Amateur Radio Service, so operator licensing and amateur regulations apply to transmitting stations.
Working on a station or interested in one? Ask on the forum. We'll help you understand the system, not just copy settings.