Skip to main content

How messages travel: voice, text and data

Beginner level · About 10 minutes · No equipment needed

In Lesson 1, we learned how radio energy moves between antennas. But a plain radio wave doesn't automatically contain a voice or a message. We have to change something about the wave in a way that represents information.

1. How can a wave carry sound?​

A microphone converts changing air pressure—your voice—into a changing electrical signal. A transmitter uses that signal to change some property of a radio wave. That process is called .

The receiver detects those changes and reconstructs a signal that a speaker can turn into sound.

Different radio systems use different methods. On familiar analog FM voice radios, the frequency of the carrier varies slightly in step with the sound. On AM broadcast radio, the strength of the carrier varies. Both are ways of representing information on a radio signal.

2. How does text travel instead?​

A digital radio first represents information as numbers. A written letter, for example, can be represented using a sequence of bits (zeros and ones). A modem then uses changes in the transmitted signal to represent those bits.

The receiving system detects the changes and reconstructs the data. Software turns that data back into the words or information you recognize.

Important: Digital radio is still radio. The signal travels through the air as an electromagnetic wave, even if the information is text, coordinates or sensor measurements rather than speech.

3. What's a packet?​

A is a small, structured piece of data sent across a communication system. Think of it as a labeled envelope: the system may include information about where it belongs, what it contains, or how to check it for errors.

Some radio systems split larger messages into multiple packets. Others send a whole short message in one packet. The rules depend on the protocol.

WordPlain-English meaningWhy you'd care
BitA single zero or one in digital dataBasic building block
ByteUsually eight bits grouped togetherHelps describe data size
PacketA formatted unit of dataRadios and networks can organize information
ProtocolAgreed rules for communicatingRadios must interpret information the same way
ModulationHow information changes a transmitted signalDifferent modes may not understand each other

4. Why can't all digital radios talk to each other?​

Imagine two people speaking different languages while standing face-to-face. They can hear each other's voices but may not understand the words.

Digital radio has a similar compatibility challenge. Two devices might use the same physical type of LoRa radio hardware and still use different packet formats, routing rules, channel settings, security methods or software protocols.

That's why Meshtastic and MeshCore are different ecosystems, and why Reticulum is yet another system. Shared hardware does not imply they can exchange messages directly.

5. How do receivers notice errors?​

Digital systems often include bits that help detect damaged data. Some methods can even correct certain errors. That's useful because weak signals and interference can flip bits or make parts of a message unreadable.

This is one reason you'll encounter settings such as in LoRa systems: it controls a tradeoff between redundancy and the amount of time needed to send information. We'll examine those settings in later LoRa guides instead of prescribing mysterious numbers.

6. What doesn't a packet guarantee?​

Sending a packet does not always mean it was received. Some systems send acknowledgments; others broadcast a packet without requiring replies. A message being shown as “sent” may mean only that your device transmitted it.

And encryption is a different subject from the radio signal itself. Some digital applications encrypt message contents, but what is permitted depends on the radio service being used—particularly on U.S. amateur bands.

The big idea

A radio link moves a signal. A modulation method represents information in that signal. A protocol gives the information meaning. All three matter when choosing interoperable equipment.

Check your understanding​

  • Can analog FM and a digital packet share a frequency? They could occupy the same frequency at different times, but an analog voice receiver cannot generally interpret the digital packet as intelligible speech.
  • Does “LoRa-compatible” mean “Meshtastic-compatible”? Not necessarily. LoRa describes a type of radio modulation; Meshtastic describes a particular communication system built with it.
  • Why might a digital packet fail? It may be too weak, corrupted, blocked, interfered with, or incompatible with the receiving setup.

Next: Lesson 3 — Direct, repeater, digipeater or mesh?.

Learn more​