Skip to main content

Radio equipment explained, one part at a time

Beginner level · About 8–10 minutes

You don't need to buy everything on a shopping list to begin learning. First, understand the job each component does.

The basic parts​

ComponentPlain-English jobA common beginner mistake
TransmitterCreates the signal that carries your informationAssuming any transmitter may use any frequency
ReceiverDetects and processes a signalAssuming it can decode every type of radio message
TransceiverA transmitter and receiver in one deviceConfusing a transceiver with a repeater
AntennaTransfers radio energy between equipment and spacePutting it behind metal or choosing the wrong frequency range
FeedlineCable carrying RF energy between radio and antennaOverlooking loss or damaged connectors
Power sourceSupplies electricity to your equipmentChoosing insufficient capacity or the wrong voltage
Controller or computerRuns software or manages digital messagesAssuming every radio needs a separate computer

A simple station diagram​

Diagram of transceiver connected to power and an antenna through a feedline.

Some handheld radios combine nearly all of this in one device. Other stations have separate radios, computers, interfaces, antennas, batteries and solar controllers.

Why the antenna deserves special attention​

When someone asks “How much transmit power do I need?” the answer depends on more than the radio. The height and placement of an antenna, obstacles, antenna type, feedline loss and receiver conditions all affect the link.

For example, a high-quality antenna with a short, suitable cable at a clearer location may outperform a more powerful radio installed poorly.

Ready for a deeper explanation? Our Antenna Learning Center covers frequency and antenna types, gain patterns, polarization, feedline loss, impedance, SWR, placement, and systematic troubleshooting. It includes an interactive lab to see wavelength and coax attenuation change as you adjust the settings.

Safety: Never put an antenna or mast near overhead power lines. Use proper grounding, lightning protection and fall protection when appropriate, and follow radio-frequency exposure limits. Tower or roof work needs suitable equipment and qualified help.

What about a Raspberry Pi or microcontroller?​

A Raspberry Pi is a small computer; a microcontroller is a smaller embedded processor often built into radio boards. Either can help with software, sensors, data logging, Internet gateways, or digital communication protocols. Neither automatically improves an antenna's range.

A LoRa node may have a microcontroller built in and need no separate Raspberry Pi for basic operation. A more elaborate station might use a Pi to bridge data, host software, or collect weather observations.

Before buying anything​

Ask yourself:

  1. Do I want voice, text, position reporting, sensor data, or experimentation?
  2. Will I use equipment at home, from a vehicle, or while hiking?
  3. Do I want a local, entirely radio-only link, or are optional Internet services acceptable?
  4. What radio-service rules apply to the bands and devices I am considering?
  5. Could I learn the first concept using equipment I already have?

Next: Lesson 5 — Explore your options.

Sources​


Not sure what a part is for? Post a picture or describe it in the forum. We'll help identify the what and the why, not just recommend a purchase.